Buell 2007 FIREBOLT Service Manual page 178

HOME
Figure 2-67. Fork Spring Compressing Tool (HD-45966)
6. See Figure 2-67. Move the fork assembly from the hold-
ing tool and compress fork in the FORK SPRING COM-
PRESING TOOL.
NOTES
FORK SPRING COMPRESSING TOOL (HD-45966)
comes with a cup and screw that are for FLT models only
and not to be used with Buell.
When using the FORK SPRING COMPRESSING TOOL
be sure not to bind the outer fork tube on the tool.
b1145x1x
8479
1. Fork cap
2. Preload pins
3. Damper rod assembly
4. Preload washer
5. Slider piston
Figure 2-68. Holding Damper Rod Assembly
7. See Figure 2-68.
remove fork cap (1).
Careful not to damage preload pins while holding damper rod
assembly.
8. Remove preload washer (4) and slider piston (5).
9. See Figure 2-67.
FORK SPRING COMPRESSING TOOL.
1
2
3
4
5
Hold damper rod assembly (3) and
NOTE
Uncompress fork and remove from
2007 Buell Firebolt: Chassis 2-47