Buell 2007 FIREBOLT Service Manual page 250

HOME
10647a
1
1. Ignition coil
2. Coil connection [83]
3. Cylinder head temperature sensor connection [90]
4. Oxygen sensor connection [137]
5. Throttle cables
9. See Figure 3-14. Disconnect the ignition coil connector
(2) and remove the ignition coil (1).
10. Disconnect the following sensors:
a. Temperature sensor [90] (3).
b. Oxygen sensor [137] (4).
11. Disconnect throttle cables from induction module/throttle
body.
5
2
4
Figure 3-14. Electrical Connections and Throttle Cables (Typical)
3
2007 Buell Firebolt: Engine 3-19