Assembling Oil Pump And Oil Tank - TOHATSU TLDI 40 Service Manual

Inspect the following components.
q Bushing
w Oil pump driven gear
Check for wear and damage.
Assembling Oil Pump
Assemble the following components
q Bushing
w Oil pump driven gear
q and w
Oil to apply
Genuine engine oil
• Make sure that q faces right side up.
• Section with large hole faces to the front.

Assembling Oil Pump and Oil Tank

Assemble the following components. (Refer to chapter 1.)
• Oil discharge pipe #1 cylinder
*
• Oil discharge pipe compressor
*
• Oil discharge pipe #2 cylinder
*
• Oil discharge pipe #3 cylinder
*
• Clamp
• Pass e and r through the rear of the oil pump.
• Secure q, e and r using the clamp t.
Make sure that check valve faces in proper
direction.
• Install the oil filter on the bracket.
Install the following components.
• Insert the oil tank into the lower rubber mount.
• Connect the oil level sensor.
• Secure the oil pipe using the clamp.
Install the following components.
• Bolt: type H630
• Washer
• Collar
• Rubber mount
4-30