Special Tools - TOHATSU TLDI 40 Service Manual

5. Special Tools

1. List of Special Tool
0.5
0 1.0
MPa
AIR FUEL
5.5MPa 0.62MPa
3T5728800
Pressure gauge assembly
3T5-72880-0
For measuring air rail fuel and
air pressure.
Crankshaft holder
3T5-72815-0
For removing and tightening
on the pulley nut.
345-72723-0
332-60002-0
353-72245-1
Backlash measuring tool
For measuring backlash between bevel gears A and B.
puller assembly
Bevel gear A bearing
345-72224-2
For removing bearing from
bevel gear A.
Crimping pliers
3T5-72864-0
For crimping OETIKER make
clamps.
3T5
728630
O-ring setting tool (ø24)
3T5-72863-0
For installing O-rings on the
fuel injectors.
3A3-72713-0
Bevel gear A bearing Setting tool
3C8-72719-0
For installing bevel gear
A bearing.
3T5728680
Drive pulley press
3T5-72868-0
For press fitting in the drive
pulley.
Piston ring wrench
353-72249-0
For installing and removing the
piston rings.
Thumbing gauge
3C8-72250-0
For measuring between bevel
gears A and B.
Bevel gear B nut wrench
346-72231-0
For removing and installing bevel gear B nut.
2-17
Piston slider
3T5-72871-0
For installing the piston in the
air compressor.
Piston pin tool
345-72215-0
For installing and removing
piston pins.
Filler gauge
353-72251-0
For measuring clearances.
Bevel gear B nut socket
346-72232-0