Efo And Efto Series - TOHATSU TLDI 40 Service Manual

EFO and EFTO Series

r Confirm that the gearshift lever is in the Neutral
position.
Remarks:
The engine will not start unless the gearshift lever
is in Neutral (N).
t Turn the throttle grip to the START (fully closed)
position.
Remarks:
Prior to turning the main switch key to ON, make
sure that the throttle grip has been set to
START(fully closed).
Mistakenly turning the key to ON with the throttle
grip open will result in the operational error being
recorded in the engine control unit (ECU).
Repeating this error will, in turn, result in the 3
warning indicators flashing simultaneously.
Should this occur, turn the main switch key to OFF;
then move the throttle grip to START (fully closed)
and proceed to the next step.
y Turn the main switch key to ON, when the beep
stops (after 1 or 2 seconds) turn it to START and
turn over the engine.
u As soon as the engine starts, release the key.
The key will automatically return to its normal
position.
Remarks:
Turning the key to Start for a period of 1 second
during engine idling or trolling has the effect of
increasing engine speed. A beep sounds each
time and engine speed increases progressively in
the following increments.
700 rpm * 800 * 900 * 800 * 700 * 800 *
900 rpm
11-8
N
R
F
ON
OFF
Main switch key
ON
OFF
START
Main switch key