TOHATSU TLDI 40 Service Manual page 49

Disassemble splash pan.
Remove engine mounting bolts.
q Bolt: type H880 at 6 locations
Secure eyebolts q to the flywheel; then use a suffi-
ciently strong hoist to suspend the power unit while
keeping it in the horizontal position.
Suspend slowly, taking care not to catch the power
unit on any of the wiring or hoses.
w Remove crankcase head.
Remove with caution by gently inserting a flathead
screwdriver in the groove.
Inspect the following components.
Oil seals: at 2 locations
O-rings
Replace any damaged components.
q
4-4
q
w