Assembling Vapor Separator; Assembling Vapor Separator Assembly; Disassembling Ffp Assembly - TOHATSU TLDI 40 Service Manual

Assembling Vapor Separator

Assemble in the reverse order of disassembly.
q Air vent screw Torque: 0.98 N-m: 0.1 kg-m: 0.7 Ib-ft
w Drain screw Torque: 1.4 N-m: 0.14 kg-m: 1.0 Ib-ft

Assembling Vapor Separator assembly

Assemble in the reverse order of disassembly.
q Vapor separator assembly
w Bolt: type H630 at 2 locations
Washers: at 4 locations
Collars: at 2 locations
Rubber mounts: at 2 locations
w Torque: 4.6 to 6.3 N-m: 0.47 to 0.64 kg-m: 3.4 to 4.6 Ib-ft

Disassembling FFP Assembly *

* FFP: abbreviation for fuel-feed pump.
Remove the following components.
q FFP connector
w Hose joint
e Fuel return hose
r Vapor return hose
t Fuel hose
y Bolt: type H630 at 2 locations
Hold a cloth in place to absorb spilling fuel when
detaching the hoses.
w
e
4-23
q
r
q
w
y
t