TOHATSU TLDI 40 Service Manual page 174

t Confirm that the remote control lever on the remote
control box is in Neutral and the neutral warm-up
lever is in at the fully closed position.
y Move the gearshift lever to Forward, Neutral and
Reverse; then back to Neutral.
u Move the advancer arm to the fully closed position.
i Turn the cable joint on the end of the remote control
cable in order to line up the cable joint with the
gearshift arm and advancer arm pins. Secure in
place using the locknut; then insert the arm pin and
secure it using the R pin and washers.
Link rod
11-3
Fully opened
Fully closed
Neutral
warm-up
lever
Gearshift lever
R
N
Fully closed
Stopper on fully
closed side
Advancer arm
Arm pin
Rod snap
Cable joint
R pin Nut
Bolt
Bracket
F
Throttle
position
sensor
Throttle
side
cable
Screw