Assembling Clutch Cam, Cam Rod And Clutch Cam Rod Bushing - TOHATSU TLDI 40 Service Manual

Assembling Clutch Cam, Cam Rod and Clutch Cam
Rod Bushing
Install the following components.
q Clutch cam
w Clutch cam rod
e Cam rod bushing
r Clutch cam spring pin: 3-12
t O-ring: 2.4 to 5.8
y O-ring: 3.5 to 21.7
Special tool Spring pin tool B
345-72228-0
Spring pins must never be reused.
Apply gear oil to the O-rings.
Install so that the spring pin does not protrude out
from the clutch cam.
Install the following components on the gear case.
q Cam rod assembly
w Cam rod bushing stopper
Once installation is completed, operate the cam rod
to confirm that it moves freely up and down.
6-10
y
t
e
r
w
r
q