Warning Process; Oil Level Indicator - TOHATSU TLDI 40 Service Manual

2) Warning Process

Whenever engine trouble occurs, the warning indicators
begin flashing and the beeper sounds.
The remedial actions described in the following sections
must be taken whenever engine faults occur.
q Engine Speed Control System (ESG)
A sudden drop in engine load can cause the engine
to race out of control. Whenever this condition
occurs, the warning beeper sounds and the ESG
mechanism is regulated.
ESG regutated speed: approx. 6,000 rpm
w Oil Level Indicator
An oil level warning is displayed whenever the oil
falls below the designated level (approx. 350 ml).
The warning consists of flashing indicators
accompanied by 3 short beeps at 2 minute
intervals.
Note: The warning is displayed whether the
gearshift lever is in the Neutral, Forward or
Reverse positions.
Remedial Action:
Reduce engine speed, move the boat to a safe
harbor and turn the main switch to OFF. Replenish
the oil in the oil tank only after the engine has
stopped.
Restart the engine and confirm that the tachometer
(or switchbox) warning indicators are off and the
beeper stays silent.
Switchbox on EPO and EPTO series
11-10
Tachometer on EPTO series
3 4
2 5
1 6
0
7
-
+

Oil level indicator