Disassembling Air Rail - TOHATSU TLDI 40 Service Manual

Disassembling Air Rail

Remove the following components.
q Fuel hose assembly and nipples
Disassemble and pull out the stopper plate.
w Air hose assembly
Disconnect the hose joint on the compressor side.
e Cooling water outlet hose
r Fuel return hose
t Air discharge hose
y Cooling water inlet hose
Remove the following components.
u Bolt: type H865 at 2 locations
i Clamp
o Air rail assembly
!0 Air injector: at 3 locations
!1 Air injector set piece: at 3 locations
q
r
u
!1
!0
4-16
o
i
t
y
e
w