TOHATSU TLDI 40 Service Manual page 112

y Assembly Step 1
Install bracket on air box.
When installing bracket be sure to install starter solenoid and PT&T solenoid ground cables on
A A and the cable clamp on bolt B B .
bolt
rectifier regulator
u Assembly Step 2
q Install the crank position sensor and cable assembly sensor and connect wiring.
w Connect the three ground cables to the starter motor.
e Connect wiring to the oil level sensor.
Rectifier regulator
q Crank position sensor
Magneto coil
Magneto coil
A
Starter motor
w Ground cable
5-19
Air box
B
Cable clamp
e Oil level sensor
q
q Cable assembly