Uconnect Settings; Customer Programmable Features - Uconnect 4 Settings - Dodge CHARGER 2020 Owner's Manual

322 MULTIMEDIA
NOTE:
FCA US LLC or your dealer may contact you

directly regarding software updates.
To help further improve vehicle security and

minimize the potential risk of a security
breach, vehicle owners should:
Routinely check www.driveuconnect.com

(US Residents) or www.driveuconnect.ca
(Canadian Residents) to learn about
available Uconnect software updates.
Only connect and use trusted media

devices (e.g. personal mobile phones,
USBs, CDs).
Privacy of any wireless and wired
communications cannot be assured. Third
parties may unlawfully intercept information
and private communications without your
consent. For further information, refer to "Data
Collection & Privacy" in your Uconnect Owner's
Manual Supplement or "Onboard Diagnostic
System (OBD II) Cybersecurity" in "Getting To
Know Your Instrument Panel".

UCONNECT SETTINGS

The Uconnect system uses a combination of
buttons on the touchscreen and buttons on the
faceplate located on the center of the
instrument panel. These buttons allow you to
access and change the Customer
Programmable Features. Many features can
vary by vehicle.
Buttons on the faceplate are located below
and/or beside the Uconnect system in the
center of the instrument panel. In addition,
there is a Scroll/Enter control knob located on
the right side. Turn the control knob to scroll
through menus and change settings. Push the
center of the control knob one or more times to
select or change a setting.
Your Uconnect system may also have Screen
Off and Mute buttons on the faceplate.
Push the Screen Off button on the faceplate to
turn off the Uconnect screen. Push the button
again or tap the screen to turn the screen on.
Press the Back Arrow button to exit out of a
Menu or certain option on the Uconnect system.
C P
USTOMER ROGRAMMABLE
— U 4 S
CONNECT ETTINGS
Uconnect 4 With 7-inch Display Buttons On The
Touchscreen And Buttons On The Faceplate
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
Press the Settings button on the bottom bar, or
press the Apps button, then press the
Settings button on the touchscreen to display
the menu setting screen. In this mode the
Uconnect system allows you to access all of the
available programmable features.
NOTE:
Depending on the vehicle's options, feature
settings may vary.
F
EATURES