License Settings; Openapi Authentication Management Setting - Konica Minolta Bizhub 601 User Manual

Utility mode
Function Management Settings
Parameter
Network Function Usage Settings
!
Detail
The following functions cannot be used if "Network Function Usage Settings" is set to "OFF".
PC-FAX transmission
Using the HDD TWAIN driver to view and retrieve documents in user boxes
Using PageScope Box Operator to view and retrieve documents in user boxes
Using PageScope Scan Direct to retrieve documents in user boxes
Using PageScope Job Spooler to view and retrieve documents in user boxes
Box operations using the PageScope Web Connection (The User Box tab does not appear.)
Stamp Settings
Parameter
Apply Stamps
Delete Registered Stamp
Driver Password Encryption Setting
Description
The encryption password for the printer driver can be changed. For details, refer to the
User manual – Print Operations.
Flash Memory Lock Password
Description
The lock password of flash memory can be changed or released.
12.4.11

License Settings

Parameter
Get Request Code
Install License
List of Enabled Functions
Note
For details on Install License, refer to the Quick Guide [Copy/Print/Fax/Scan/Box Operations].
12.4.12

OpenAPI Authentication Management Setting

Parameter
Restriction Code Settings
bizhub 751/601 (Version 2)
Description
Specify settings for network func-
tions that are difficult to count when
managing operations.
Description
Select whether or not a stamp is added when printing or sending.
Select whether or not stamps registered for copy protection can be deleted.
Description
Issues the request code for this machine that registers in the License Management Serv-
er (LMS).
Select the function to be enabled, and then type in the license code acquired from the
License Management Server (LMS).
Enabled functions can be checked.
Description
Configure settings to prevent our deprecated OpenAPI connection application from be-
ing registered in this machine. For details, contact your service representative.
Default Setting
ON
Default setting
Use Factory Default
Default setting
Use Factory Default
12
12-41