Setting The "System Auto Reset Confirmation" Function - Konica Minolta bizhub C451 User Manual

Additional copy operations
– To reduce the time, touch [-].
– Both settings can be set between 0.1 second and 3.0 seconds in
0.1-second increments.
– To cancel changes to the settings, press the [Reset] key.
4
Touch [OK].
The Accessibility Setting screen appears again.
5
Touch [Close] or press the [Accessibility] key.
The Basic screen appears again.
Note
The Enlarge Display mode is compatible with basic copy, scanning and
fax functions. With the Enlarge Display mode, text and illustrations are
displayed at a larger size so that they can be seen more easily. For de-
tails, refer to the User's Guide [Enlarge Display Operations].
As the factory default, "Time To Start" is set to 0.8 second and "Interval"
is set to 0.3 second.

Setting the "System Auto Reset Confirmation" function

When the system auto reset operation is performed in Enlarge Display mode,
a message can be displayed, allowing you to choose either to continue op-
erating without exiting Enlarge Display mode or to exit Enlarge Display mode
and return to the Basic screen.
In addition, it is possible to specify the display time for the message request-
ing confirmation to exit Enlarge Display mode.
Yes: Enlarge Display mode is not exited.
No: Enlarge Display mode is exited, and the Basic screen is displayed.
C451
3
3-29