Table of Contents
Advertisement
Settings via software (sewing automat)
Instruction manual 550-532 - 00.0 - 07/2015
7.18 Resetting parameters to factory defaults
Prerequisite:
• Machine is in programming mode, Ready key LED is off.
1.
Press and hold the Memory key for 6 s.
The key LED illuminates.
2.
Use the +/- Program keys to set parameter number U098.
3.
Press the Ready key.
4.
Use the +/- Function keys to enter a function value of 1.
5.
Press the Select key.
The controller beeps once. If the controller beeps three
times then the reset was not successful.
6.
Set parameter U085.
Setting parameter U085
Prerequisite:
• Machine is in programming mode, Ready key LED is off.
1.
Press and hold the Memory key for 6 s.
The key LED illuminates.
2.
Use the +/- Program keys to set parameter number U085.
3.
Press the Ready key.
4.
Use the +/- Function keys to enter a function value of 1.
Press the Select key.
57
Advertisement
Table of Contents
