Table of Contents
Advertisement
34
6.2 Adjusting the holding force of the button
clamp
Fig. 12: Adjusting the holding force of the button mount
(1) - Pressure controller
Held between the button mounts (2) with as little force as possible,
the button is securely clamped to prevent it from twisting.
1.
Set the pressure controller (1) so that the button is securely
held without being damaged (approx. 3 bar).
Operation of the button feeder
①
②
(2) - Button mount
Instruction manual 550-532 - 00.0 - 07/2015
Advertisement
Table of Contents
