Table of Contents
Advertisement
38
Fig. 16: Sorting by peg II
⑤
⑥
(5) - Peg
4.
Loosen the setscrew (6).
5.
Adjust the height of the peg (5).
6.
Re-tighten the setscrew (6).
Sorting by plate
The plate (8) is set such that only buttons with the bevel on the
bottom edge facing down are transported further.
Fig. 17: Sorting by plate I
⑦
⑧
(7) - Screw
1.
Loosen the screw (7).
2.
Shift the position of the plate (8) in the elongated hole such
that the tip (9) of the plate separates the buttons that are posi-
tioned incorrectly.
Operation of the button feeder
(6) - Setscrew
(8) - Plate
Instruction manual 550-532 - 00.0 - 07/2015
Advertisement
Table of Contents
