Settings via software (button feeder)
Instruction manual 550-532 - 00.0 - 07/2015
8.2 Selecting and fitting the transfer arm
Fig. 27: Fitting the transfer arm
①
②
(1) - Transfer arm
1.
Press the Ready key on the control panel of the machine.
Key LED is off, machine is without function.
2.
Select a transfer arm (1) matching the button spacing and the
button diameter.
3.
Press numeric key 3 on the control panel of the button feeder.
Transfer arm moves to service position.
4.
Hold the transfer arm holder in place before loosening the
screws (2).
5.
Tighten the selected transfer arm with screws (2).
6.
Press numeric key 3.
Transfer arm moves to standby position.
7.
Press the Ready key.
(2) - Screws
69