Settings via software (sewing automat)
Instruction manual 550-532 - 00.0 - 07/2015
2.
Press the Select key to save the seam pattern to the USB
key (HSW2001.scv = U01 ~ HSW2010.scv = U10).
3.
Press the Select key to confirm the save operation.
The Function display shows the value ok, the controller
beeps, and the seam pattern is now saved.
4.
Press the Reset key twice.
Deleting a seam pattern from the controller: Value 3
1.
Use the +/- Function keys to set a value of 3.
2.
Press the Select key.
3.
Press the Reset key to confirm the deletion.
Function display shows "----".
Editing a seam pattern / contour test: Value 4
Fig. 23: Editing a seam pattern
1.
Use the +/- Function keys to set a value of 4.
2.
Press the Select key.
The Program display shows 1 for the first stitch, the Function
display shows the value for the X axis, and the X axis symbol
LED illuminates.
3.
Use the +/- Function keys to set the coordinates for the 1st
stitch for the X axis.
4.
Press the Select key.
The Y axis symbol LED illuminates, the Function display
shows the value for the Y axis.
5.
Use the +/- Function keys to set the coordinates for the 1st
stitch for the Y axis.
59