Table of Contents
Advertisement
Operation of the button feeder
Instruction manual 550-532 - 00.0 - 07/2015
Slide outward: Buttons with a smaller diameter are separat-
ed and transported
3.
Tighten the knurled screws (1).
4.
Check the sorting of the buttons and repeat the adjustment if
necessary.
Sorting by peg
The peg (5) is set such that only buttons with the bevel on the top
edge facing up are transported further.
Fig. 15: Sorting by peg I
③
(3) - Screw
1.
Loosen the screw (3).
2.
Shift the position of the peg holder (4) in the elongated hole.
3.
Re-tighten the screw (3).
(4) - Peg holder
④
37
Advertisement
Table of Contents
