Settings via software (sewing automat)
Instruction manual 550-532 - 00.0 - 07/2015
7.4 Setting the button hole spacing
Important
Changes to the hole spacing only take effect temporarily. For
information on making permanent changes and relocating the
seam pattern, see 7.12 Saving seam patterns, p. 51.
Fig. 22: Button hole spacing
Y
7.4.1
Setting the X distance
1.
Press the Select key until the X axis symbol LED illuminates.
2.
Press the +/- Function keys until the desired X axis value is
reached. The entered value corresponds to 0.1 mm, i. e. the
value 30 equals 3 mm.
7.4.2
Setting the Y distance
1.
Press the Select key until the Y axis symbol LED illuminates.
2.
Press the +/- Function keys until the desired Y axis value is
reached. The entered value corresponds to 0.1 mm, i. e. the
value 30 equals 3 mm.
X
47