Table of Contents
Advertisement
Technical Specifications
Instruction manual 550-532 - 00.0 - 07/2015
2
Technical Specifications
The 550-532 is a CNC double lock stitch button sewing automat
with automatic button feeder.
2.1 Characteristics
The existing programs are scalable and can be saved in this
modified form. The machine is equipped with an automatic sewing
foot lifter, thread cutter, thread wiper, a needle thread clamp below
the throat plate for reliable sewing-on and an integrated DC direct
drive including a control panel.
Technical features
• The sewing automat is driven by an integrated positioning
drive. A controller controls the sewing drive and also 2 stepper
motors for the X and Y motions required for generating the
seam geometry.
• The clamping feet are raised by a stepper motor.
• The maximum size of the sewing field is 40 mm in the X direc-
tion (lateral to the arm) and 30 mm in the Y direction (parallel
to the arm).
• The machine head is oil-free. This means that there is no dan-
ger of soiling the sewing material with oil.
• The hook is lubricated by a wick lubrication system, fed from a
reservoir visible to the operator.
• A maximum of 33 pre-programmed standard button patterns
are available. These standard patterns can be temporarily
modified (changes to the total length, total width, speed).
When the machine is switched off, the modified values of the
most recently used bartack are restored when the machine is
switched on again.
• The maximum number of stitches that can be stored is 16,000.
• 25 sequence programs with up to 30 seam patterns per
sequence can be stored.
• The coordinate entry system has an accuracy of 0.1 mm.
• Bobbin thread decrementing counter and a daily piece counter
• The arm shaft of the button sewing automat is directly driven
by a brushless DC motor.
• Speeds of up to 3,000 min
• Up to 10 user-defined button patterns can be programmed
and stored.
-1
can be set at 100 min
-1
increments.
11
Advertisement
Table of Contents
