Table of Contents
Advertisement
Operation of the sewing automat
Instruction manual 550-532 - 00.0 - 07/2015
Removing an empty bobbin
1.
Pull the hook cover (3) downwards.
2.
Lift the bobbin housing flap (2).
3.
Remove the bobbin housing (1) with the bobbin (6).
4.
Remove the empty bobbin from the bobbin housing (1).
Inserting a full bobbin
1.
Insert the full bobbin into the bobbin housing (1).
2.
Feed the hook thread through the bobbin housing slot (7)
under the tensioning spring (5) into the hole (4).
3.
Pull the hook thread approx. 2.5 cm out of the bobbin
housing (1).
The bobbin must rotate in the direction of the arrow when
pulling out the hook thread.
4.
Insert the bobbin housing (1).
5.
Close the hook cover (3).
29
Advertisement
Table of Contents
