Saving Seam Patterns; Assigning The Memory Keys - DURKOPP ADLER 550-532 Instruction Manual

Settings via software (sewing automat)
Memory Key
number combination
P1 P1
P2 P2
P3 P3
P4 P4
P5 P5
P6 P1 + P2
P7 P1 + P3
Instruction manual 550-532 - 00.0 - 07/2015

7.12 Saving seam patterns

Standard seam patterns can be stored under the seam pattern
keys P1 to P5, with a total of 50 memory locations available.
The memory locations are called up via the +/- Function keys,
the memory locations up to number 25 can also be called up using
single seam pattern keys and combinations of these.
Sewing pattern memory key combinations
Memory Key
number combination
P8 P1 + P4
P9 P1 + P5
P10 P2 + P3
P11 P2 + P4
P12 P2 + P5
P13 P3 + P4
P14 P3 + P5

7.12.1 Assigning the memory keys

Prerequisite:
• Machine is in programming mode, Ready key LED is off.
1. Press the Memory key and key P2 at the same time.
2. Press the +/- Program keys to select a memory location.
3. Press the Ready key to confirm the memory location.
4. Select a seam pattern
( 7.2 Setting the seam pattern, p. 45).
5. Set the button hole spacing
( 7.4 Setting the button hole spacing, p. 47).
6. Set the speed ( 7.5 Setting the speed, p. 48).
Memory Key
number combination
P15 P4 + P5
P16 P1 + P2 + P3
P17 P1 + P2 + P4
P18 P1 + P2 + P5
P19 P1 + P3 + P4
P20 P1 + P3 + P5
P21 P1 + P4 + P5
Memory Key
number combination
P22 P2 + P3 + P4
P23 P2 + P3 + P5
P24 P2 + P4 + P5
P25 P3 + P4 + P5
51