58
7.19 Working with a USB key
Up to 10 custom seam patterns can be loaded into the controller
via a USB key.
Prerequisite:
• Machine is in programming mode, Ready key LED is off.
1.
Plug the USB key into the USB port on the controller.
The controller beeps briefly.
2.
Press the USB key.
The key LED illuminates, the Program display shows
parameter number U01.
3.
Press the +/- Program keys and select a memory location
(U01 ~ U10).
4.
Press the Ready key.
The Function display shows values from 1 to 4:
• 1: Load seam pattern from USB key.
• 2: Save seam pattern to USB key.
• 3: Delete seam pattern from controller.
• 4: Edit seam pattern.
Loading a seam pattern into the controller from the USB
key: Value 1
1.
Use the +/- Function keys to set a value of 1.
2.
Press the Select key and select the desired seam pattern file
(HSR2000.csv ~ HSR2099.csv).
3.
Press the Select key to load the seam pattern from the USB
key.
The Function display shows the value ok, the controller
beeps, and the seam pattern is now saved.
4.
Press the Reset key twice.
Saving a seam pattern from the controller to the USB key:
Value 2
1.
Use the +/- Function keys to set a value of 2.
Settings via software (sewing automat)
Instruction manual 550-532 - 00.0 - 07/2015