Settings via software (sewing automat)
Instruction manual 550-532 - 00.0 - 07/2015
7.21.2 Loading seam patterns
Fig. 25: Loading seam patterns
①
(1) - Main switch
1.
Switch on the controller using the main switch (1).
The current software version is briefly shown on the display.
2.
Plug the USB key into the USB port (2) of the controller.
3.
Press the USB key and wait approx. 3 seconds.
4.
Press the Memory key.
5.
Press the P5 key.
The download into the controller starts. Duration is approx.
4 min.
6.
Press the Reset key.
7.
Pull out the USB key.
The software transfer is complete.
(2) - USB port
②
65