Feed Switch Function; When Thermal Paper Is Used; When Label Paper Is Used; When The Macro Is Executed - Citizen CBM-270 User Manual

4.6

FEED Switch Function

4.6.1

When Thermal Paper is Used

Pressing the switch, feed the paper by 1 line.
continuously.
4.6.2

When Label Paper is Used

Pressing the switch, feed the paper by 1 line.
will be fed by one label.
4.6.3

When the Macro is Executed

If the ERROR lamp is blinking while waiting for execution of a macro, press the FEED switch.
waiting state continues until the switch is pressed.
4.6.4

When the Label is Fed to the Paper Cutting Position by the Command

The PAPER lamp blinks.
next label. The waiting state continues until the switch is pressed.
CAUTION:
If the label paper is fed by 1 line by pressing the FEED switch, the label head position will be dislocated.
Note that if printing starts in this state, the label will be printed dislocated.
paper by 1 label.)
4.7

Paper End Function

If the printing paper runs out, the parallel interface will output BUSY, FAULT, and PE to the host, and the
serial interface will output DTR to stop printing, respectively.
printing will be resumed after replacing the paper.
Paper." After replacing the paper, cancel BUSY (DTR), FAULT, and PE outputs.
Near Paper End Function."
If the switch is held down for 1 second or more, the paper
After cutting the paper, pressing the FEED switch searches for the head of the
13
If the switch is held down, the paper will be fed
If some data are still remaining in the buffer,
Replace the paper according to "4.3 Inserting the
CBM-270 User's Manual
(It is recommended to feed the
For details, see "4.8
The
CITIZEN