System Requirements; Transport And Packaging; Dispatch; Unpacking The Printer - Neopost SA50S User Manual

Address printer

Table of Contents

2. System requirements

The printer is designed for use with a PC (Pentium 200 MHz) equipped

with a parallel and serial interface. It can be operated with the following

operating systems: Windows 3.x, Windows 95 / 98 / 2000 or Windows

NT4.

You will need a shielded, twisted parallel interface cable (not included

within the scope of delivery).

The address printer is dispatched in appropriate packaging so that it

reaches its destination without damage via a regular mode of transport.

. . . .

The carrier is liable for any damage during transport. Transport

and storage should take place under normal conditions, i.e. at

temperatures between +5°C and +70°C and relative air humidity

of up to 80%. Impermissible conditions may lead to damage which

is not externally visible.

Remove all packaging and take out the printer with its accessories.

Use the following list to check that all parts of the printer are present and

undamaged:

• 1 printer

• 1 power cable (option)

• 2 contact brackets, short

• 1 guide bar

• 1 printer driver (installation guide and floppy disk or CD)

If you do not wish to use the packaging later, e.g. for returning the printer

for repair, be sure to dispose of it in an environmentally appropriate way.

User Guide SA50S

NEOPOST Address Printer

Table of Contents