Neopost SA50S User Manual page 19

Adjusting to the format of the print medium
1. Adjusting the contact bracket
You must first of all know whether your print medium runs through the
printer in a longitudinal or transverse direction.
The lines are always printed in the direction in which the print
medium moves.
If the lines are parallel to the longer side, the medium must be fed in via
the narrow side.
If the lines are parallel to the shorter side, the medium must be fed in via
the longer side.
•
Push the rear contact bracket all the way to the side wall of the
printer.
•
Place your print medium between the contact brackets all the way up
to the separators.
•
Push the front contact bracket up to the print medium. However, the
medium must not be clamped. In the case of very narrow formats, it
may be necessary to turn the outer contact bracket.
User Guide SA50S
NEOPOST Address Printer
19