Neopost SA50S User Manual page 37

NEOPOST Address Printer
HexD
This function is used to check the connection from the printer to the PC.
In hex-dump, all characters received from the receive buffer are printed
in LetGot12.
You can also switch hex-dump on directly by keeping the start key
pressed and then switching the printer on.
Do not end hex-dump by switching the printer off, as settings may then
be changed! End it by pressing the prog, end or start keys.
InpD
In Inp-Dump, all 96 kbytes of the receive buffer are printed with PC8-
symbols.
The complete print-out requires approximately 180 sheets. Switch the
printer off before a dump print-out and then on again. Transmit the print
job and then start the dump print-out. The required data are now at the
beginning of the buffer. Stop the process by pressing the end key.
SetD
Print-out of the 10 setting configurations. Nine sheets are required.
HARDWARE TEST
For service use only.
HEAD RESET
Resetting the display for used ink after inserting the new print
cartridge(s).
37
User Guide SA50S