CHAR. SPACING
Increases the character spacing in dots from 0 to 90.
CHAR. HEIGHT
Increases the character height up to six times without changing the width.
CHAR. WIDTH
Increases the character width up to six times without changing the height.
LINE SPACING
Increases the line spacing from 1 to 10 lpi (=lines per inch).
ORIENTATION
Address rotation by 180°.
Nor – the print-out can be read normally from the user side.
Rev – the print-out is rotated by 180°.
PAPER SIZE
The following page shows an overview of the format sizes which you
can set in programming mode in the PAPER SIZE menu.
The two right-hand columns in the table show which contact bracket
should be used in each case (cf. also Section 9.1).
The following contact brackets can be used:
Short contact bracket (2x) R0612.1.043 (Standard)
Medium contact bracket
Long contact bracket
User Guide SA50S
NEOPOST Address Printer
R0612.2.044 (Accessories)
R0612.2.045 (Accessories)
31