Neopost SA50S User Manual page 36

•
the contacts to all nozzles, addressed individually in sequence, are
displayed in a continuous oblique line.
If a pattern or the oblique line contains gaps (see the examples on the
next page), the contact areas and the cable contacts of the affected print
head must be cleaned, or the affected print head must be replaced (see
Section 9.4 -Notes on maintenance).
E of defects on print heads:
XAMPLES
b.1
c
c
a.2
a.1 = No connection at contact "K" ( for print-head H1)
a.2 = No connection at contact "B" ( for print-head H3)
b.1 = No connection at contact "10" (for print-head H1)
b.2 = No connection at contact "16" ( for print-head H3)
c = These nozzles are soiled
Char
Print-out of the currently active character set.
User Guide SA50S
NEOPOST Address Printer
c
c
H1
H2
H3
H1
a.1
b.2
H3
36