Printing Addresses - Neopost SA50S User Manual

Measuring the length of the medium
•
Insert a medium.
•
If the printer is not in off-line mode, press the start key and switch
the printer OFF.
•
Press the key and keep it pressed down until (L) appears in the
display. The length is then stored.
The length of the medium is measured and displayed.

5.9 Printing addresses

Addresses are printed in the same way as on other desktop printers,
namely via your program.
To print an address, select the address printer from your list of printers. If
you cannot do this, the printer driver has not been correctly installed. You
must then install the driver as described in this guide.
Start printing by giving the print command in your program.
The address printer must be in on-line mode. If it is not, press the start
key.
Counting addresses
The five-digit number (right top) in the display is the counter status of the
received and printed addresses.
Resetting the counter status:
•
When in off-line mode, press the start and pap keys simultaneously.
The counter status is also reset when the printer is switched off.
Cleaning of print nozzles
It may at times be necessary to clean the print nozzles or to spray them
clear.
•
Insert a sheet of paper under the print-head.
•
Switch to off-line mode
•
Press the start and
The print nozzles are sprayed clear into the sheet of paper which has
been fed in.
User Guide SA50S
NEOPOST Address Printer
keys simultaneously.
23