Neopost SA50S User Manual page 33

NEOPOST Address Printer
CHARACTER SET
These are national character sets with their own special characters in
each language.
HEADXY CORRECT.
This function is used to correct manufacturing tolerances between the
print heads.
The resulting offset between the print nozzle areas of two adjacent
cartridges can be corrected horizontally.
XY = 12 for cartridges 1 and 2
XY = 23 for cartridges 2 and 3
The correction is carried out in 1/300 inch steps:
-24 –23 –22 –21 ... –2 –1 0 1 2 ... 21 22 23 24
PAPER SENSOR
If you want to print onto media containing black areas, you can
deactivate the paper light barrier while you are printing. To do this, you
must set a format size under Paper Size (an incorrect format size can
lead to printing outside the paper area).
With a deactivated paper sensor and a specified format size, the light
barrier is queried only at paper feed.
SETTING LOCKED
This function can be used to individually lock each configuration for
printer instructions, which are then ignored.
This setting is highlighted in the program print-out by the characters "!!!".
The active configuration status is shown on the display.
The display text Set1U means that configuration 1 is not locked (U for
unlocked). The display text Set1L means that configuration 1 is locked (L
for locked).
/ / / /
As a rule, this menu point should not be locked. / / / /
(This can lead to undesirable problems)
SPECIAL FUNCT.
AUTO LF
This defines how the printer should interpret the control characters
CR = Carriage Return
LF = Line Feed
FF = Forward Feed
33
User Guide SA50S