Resetting The Address Printer - Neopost SA50S User Manual

Print test
•
Insert a sheet of paper.
•
Switch to off-line mode.
•
Press the test key.
A print test is now carried out.

5.10 Resetting the address printer

With loss of configuration
The following procedure resets the printer. All values and configurations
which have been changed are reset to the works settings:
•
Switch the printer off.
•
Keep the prog key pressed and switch the printer on again.
The display shows the procedure:
Without loss of configuration
In this procedure, the works setting is simply selected. It is stored in
Setting No.0 where it cannot be changed. This is done in programming
mode as follows:
•
Switch the printer to off-line mode.
•
Press the prog key twice.
•
Use the prev or next key until No.0 appears in the display.
•
Press the prog key again.
The end key terminates programming mode, the works setting has been
selected.
User Guide SA50S
NEOPOST Address Printer
SA50S
Default
Inkjet
Reset
24