Table of Contents
Advertisement
5. Installation and operation
5.1 Installing and connecting the printer
Install the printer as described in Section 1.4 – Location of the printer.
• Make sure that your PC and the printer are both switched off.
• Connect the printer cable to your PC and to the printer.
The type of power terminal depends on the country version of the printer.
Ensure that the power cable connector is suitable for your location.
• Connect the power cable to the printer's power socket. Connect the
power plug to a grounded socket.
• For the moment, leave the printer switched off.
5.2 Inserting print cartridges
To equip the printer with print cartridges you will need three Fast Dry
Inkjet cartridges of the HP type with the designation C8842A or three
Inkjet cartridges with the designation HP51645A, 6168A, 6169A or
6170A. (They all are usually available from PC dealers or by mail order.)
Observe the notes on "Handling the print cartridges" as well as the
directions given by the cartridge manufacturer.
• If the printer unit is located on the rear side panel, unscrew its two
lower knurled screws and push the unit into mid-position.
• Fully release all restraining levers.
• Take the first cartridge from its packaging and remove the protective
tab.
User Guide SA50S
NEOPOST Address Printer
11
Advertisement
Table of Contents
