The Control Panel - Neopost SA50S User Manual

5.4 The control panel

A 2-line display is integrated into the control panel.
The first line displays how much ink is left, the selected font and the
counter status.
The second line shows the operating mode (e.g. On for on-line mode),
the resolution, the configuration number and finally the print direction.
The keys for print operation are explained below. The applicable key
lettering is shown directly above the keys (the lettering in the gray fields
applies to programming mode).
The start key is always operational; all other keys are operational only in
off-line mode.
start: Switch printer ONLINE/OFFLINE
pap: start/stop paper feed
[ [ [ [ end] ] ] ] :
Leave menu/abort changes
test: Initiate/stop print of test addresses
[ [ [ [ next] ] ] ] : Select next menu point/Increase value
clean: Spray print nozzles clear.
[ [ [ [ prev] ] ] ] : Select previous menu point/Decrease value
: Rotate address by 180°, Nor = Normal, Rev = Reverse.
[ [ [ [ enter] ] ] ] : Activate Menu/option field. (Last Status stored)
prog: Switch over to programming mode.
: Repeat print of the last address(es).
: Paper length measurement.
User Guide SA50S
NEOPOST Address Printer
14