Installing Printer Drivers - Neopost SA50S User Manual

Note on replacing used cartridges:
If the message "NO INK!! CHANGE PRINTHEAD" appears in the display,
then one or more cartridges are empty.
•
To replace the cartridges, put the printer into off-line mode with the
start key (the display must show OFF).
•
Proceed exactly as during the initial insertion. As soon as the
restraining lever is opened, the used cartridges can be easily pulled
out upwards.
Use the menu to perform a "HEAD RESET" (see page 37)

5.3 Installing printer drivers

To allow the address printer to be operated from your PC, you must first
install one of the printer drivers supplied with the printer.
•
Insert the CD ROM supplied into the drive.
•
Follow the instructions on your monitor.
•
The product number can be obtained from the case of your CD
ROM.
When you have completed the installation, you can configure the printer
as described in Section 6 - Programming mode.
User Guide SA50S
NEOPOST Address Printer
13