Change Password - Barco R9002328 Owner's Manual

Note : all projectors leave the factory after a burn-in period of approximately 100
hours.

Change password

This item is password protected.
Highlight
control disc and press ENTER.
The current password is displayed.
The new password must consist of 4
digits between 0 and 9. Push the
control disc to the left or to the right to
select the digits to be changed. Use
the numeric keys to enter the new
digits.
Press ENTER to save the new pass-
word. Before saving the new pass-
word, a confirmation screen will be
displayed.
Press EXIT to return to the Projector
Setup menu without saving the new
password.
9-6
All manuals and user guides at all-guides.com
with the
PROJECTOR SETUP
CHANGE PASSWORD
ê
ENTER will display the selected item.
EXIT will return to the Path Selection
main menu.
ADJUST will return to the Operational
mode.
ç è
ENTER displays the Confirmation menu.
EXIT returns to the Service mode with-
out saving the new password.
R5975059A BARCOVISION 708 200498
é