Staple Position - Ricoh SP 5200S Operating Instructions Manual

2. Printing Documents
• Be sure to set the paper size and paper orientation in the printer driver when using this function.
• The staple function cannot be used if the following paper types are used.
• Special 1, Special 2, Special 3, Middle Thick, Thick 1, Thick 2, Thick 3, Transparency,
Labels, Envelope
• This function is also available using the PostScript 3 printer driver.
• Depending on the application, print settings may not be enabled and printed output may not be as
expected.

Staple position

The following table shows staple positions:
• Stapling might not be in the specified position if combine (layout) and duplex printing are both
selected. After setting the staple position, use the printer driver's preview icon to check the position
before printing.
• For printing methods, see the printer driver Help.
Stapling precautions
Paper size and staple capacity
1
8 / 14 , 8
2
13 , Mixed Sizes
A4 , B5 JIS , 8
, 16K
84
Print Data
Direction
Portrait
Landscape
Paper Size
1 1
/ 13 , 8 13 , 8
4
1 1
/ 11 , 7 / 10
2 4
Staple Position
CCW007
Staple Capacity
/
2
1
/
2
30
50