Ricoh SP 5200S Operating Instructions Manual page 117

Depending on the security settings, certain print jobs may not be displayed.
8. Select the file you want to print, and then press [Print].
9. Enter the new number of sets using the number keys if necessary, and then press [Yes].
You can enter up to 999 sets.
Press the [Clear/Stop] key to correct any entry mistakes.
The remaining sets are printed.
• If you want to cancel printing, press [No] in step 9.
• If you select multiple files, the confirmation screen displays the total number of files to be printed.
• If you select multiple documents and do not specify the number of sets on the confirmation screen,
one set less than the number specified on the computer is printed for every selected document. If the
number of sets specified on the computer is "1", one set each is printed for every document.
• When printing accumulated sample print documents, you cannot change the numbers of sets.
• When printing is completed, the stored file will be deleted.
• To stop printing after printing has started, press [Exit] until the printer screen appears, and then
press [Job Reset]. The file will be deleted.
Deleting Sample Print files
If you are not satisfied with the sample printout, you can delete the Sample Print file, revise it and print it
again until the settings are suitable.
Printing from the Print Job Screen
115