Ricoh SP 5200S Operating Instructions Manual page 69

• To print onto custom size envelopes, you must specify the envelope's dimensions. Measure the
horizontal dimension of the envelope with the flap closed.
1
2
CFG017
1. Vertical size
2. Horizontal size
• Check the envelopes are not damp.
• Load only as much envelopes as can be held between the paper guides on the bypass tray. For the
number of envelopes that you can set on the bypass tray, see "Recommended Paper Sizes and
Types", About This Machine.
• Check there is no air in the envelopes before loading.
• Before loading envelopes, flatten leading edges (the side going into the machine) by pressing a
pencil or ruler across them.
• To get better print quality, it is recommended that you set the leading-edge print margin to at least
15 mm (0.6 inches) and the other margins to at least 10 mm (0.4 inches) each.
• Load only one size and type of envelope at a time.
• Before loading envelopes, check they are rectangular in shape.
• For details about supported envelope types, see "Envelopes", About This Machine.
• You can also use paper trays (other than the bypass tray) to print on envelopes. For details about
supported envelope types, see "Recommended Paper Sizes and Types", About This Machine.
• page 155 "System"
Setting Paper on the Bypass Tray
67