Stapling Position And Original Setting - Ricoh AD1 Reference Operation Manual

STAPLING (optional finisher is required)

Stapling Position And Original Setting

When you set originals in the Staple mode, refer to the following table.
Original setting
on the exposure glass
1
Press the Sorter key to light the
Staple (lower) indicator.
2
Enter the number of copies and any settings you require.
When setting originals one at a time on the exposure
glass or in the document feeder
Set the original and then press the Start key.
Start with the first page to be copied.
Set the next original and press the Start key.
Set the originals in the same direction as step
When the remaining memory space reaches 0%, the machine stops memoriz-
ing. Press the [Output] key to finish copy jobs which are already in memory.
In this case, copies will be delivered without stapling. Continue copying by follow-
ing the instrunction on the panel display. If you want to delete the stored images,
press the [Clear] key.
When the machine finishes scanning all the originals, press the # key.
Press the Start key. The copies will be delivered.
46
in the document feeder
Copies
Double
Combine/
Copies
Sorter Series Copies
Positive/
Negative
Repeat Sort
Erese Center/
Staple
Overlay Duplex
Border
.
D.Size Mag.
(inch)
Zoom up
Auto Reduce/
Direct. Mag.
(%) Enlarge Zoom Down