Ricoh SP 5200S Operating Instructions Manual page 53
Hide thumbs
Also See for SP 5200S:
- Operating instructions manual (444 pages) ,
- Safety information manual (36 pages) ,
- Service manual (667 pages)
Table of Contents
Advertisement
• When using Windows 7 or Windows Server 2008 R2, click the [Start] menu, and then
click [Devices and Printers].
2.
Click the icon of the printer you want to use.
3.
On the [File] menu, click [Properties].
• When using Windows Vista or Windows Server 2008, right-click the icon of the printer
you want to use, and then click [Properties].
• When using Windows 7 or Windows Server 2008 R2, right-click the icon of the printer
you want to use, and then click [Printer properties].
4.
Click the [Accessories] tab.
If options in the [Accessories] tab are disabled, bidirectional connection is enabled. In this
case, no change is necessary for option settings.
5.
Select options installed from the [Options] area, and then make the necessary
settings.
6.
Click [Change Input Tray Settings...].
7.
In [Input Tray:] select which trays to use, and then, in [Paper Size:] select the size of
the paper that you want to load in each tray.
Click [Modify Input Tray/Paper Size] to apply the setting for each tray.
8.
Click [OK] twice to close the printer properties dialog box.
For the PCL 5e printer driver:
1.
On the [Start] menu, click [Printers and Faxes].
• When using Windows Vista or Windows Server 2008, click [Control Panel] on the
[Start] menu, and then click [Printer] in "Hardware and Sound".
• When using Windows 7 or Windows Server 2008 R2, click the [Start] menu, and then
click [Devices and Printers].
2.
Click the icon of the printer you want to use.
3.
On the [File] menu, click [Properties].
• When using Windows Vista or Windows Server 2008, right-click the icon of the printer
you want to use, and then click [Properties].
• When using Windows 7 or Windows Server 2008 R2, right-click the icon of the printer
you want to use, and then click [Printer properties].
4.
Click the [Accessories] tab.
If options in the [Accessories] tab are disabled, bidirectional connection is enabled. In this
case, no change is necessary for option settings.
5.
Select options installed from the [Options] area, and then make the necessary
settings.
Making Option Settings for the Printer
51
Advertisement
Table of Contents
