Ricoh SP 5200S Operating Instructions Manual page 40

1. Preparing the Machine
https://192.168.15.16/printer
You can enter "http://machine's IP address or host name/ipp" as the machine's address.
11. Enter a name for identifying the machine in [IPP Port Name]. Use a name different from
the one of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box becomes the IPP port
name.
12. Click [Detailed Settings] to make necessary settings, and then click [OK].
For information about the settings, see SmartDeviceMonitor for Client Help.
13. Click [OK].
14. Check that the name of the printer driver you want to install is selected, and then click
[OK].
15. Change the name of the machine if you want, and then click [Next >].
Select [Yes] to configure the machine as default.
16. Specify whether or not to share the machine, and then click [Next >].
17. Specify whether or not to print a test page, and then click [Next >].
18. Click [Finish].
If the [Hardware Installation] message appears, click [Continue Anyway].
The printer driver installation starts.
• To stop installation of the selected driver, click [Cancel] before installation is complete.
• A user code can be set after the printer driver installation. For information about user code, see the
printer driver Help.
• Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on
the CD-ROM root directory.
Changing the port settings for SmartDeviceMonitor for Client
Follow the procedure below to change the SmartDeviceMonitor for Client settings, such as TCP/IP
timeout, recovery/parallel printing, and printer groups.
Windows XP, Windows Server 2003/2003 R2:
1. On the [Start] menu, click [Printers and Faxes].
The [Printers and Faxes] window appears.
2. Click the icon of the printer you want to use. On the [File] menu, click [Properties].
3. Click the [Ports] tab, and then click [Configure Port...].
The [Port Configuration] dialog box appears.
38