Using Usb Interface - Ricoh SP 5200S Operating Instructions Manual

5. Select [Installable Options] in the drop-down menu, and then configure settings as
needed.
Mac OS X 10.5 or higher
Click [Driver], and then configure settings as needed.
6. Click [Apply Changes].
Mac OS X 10.5 or higher
Click [OK].
• If the option you want to select is not displayed, PPD files may not be set up correctly. To complete
the setup, check the name of the PPD file displayed in the dialog box.

Using USB Interface

Follow the procedure below to set up USB connection.
• USB2.0 can be used only with Mac OS X 10.3.3 or higher.
1. Start System Preferences.
2. Click [Print & Fax].
3. Click [Set Up Printers].
Depending on your computer's operating system, [Set Up Printers] may not appear. If [Set Up
Printers] does not appear, proceed to the following step.
4. Click the [Add] or [ ] button.
Mac OS X 10.5 or higher
Click [Default].
Mac OS X 10.4
Click a printer that has "USB" indicated in the "Connection" column.
Other Mac OS X
Click [USB] on the pop-up menu.
The connected printer appears.
5. Select the printer, and then select its manufacturer from the [Printer Model:] pop-up
menu.
Under Mac OS X 10.4, select the printer you are using from the [Print Using] pop-up menu.
A list of printer types appears.
Using the Printer Driver under Mac OS X
167