Using The Lpr Port - Ricoh SP 5200S Operating Instructions Manual

1. Preparing the Machine
• To stop installation of the selected driver, click [Cancel] before installation is complete.

Using the LPR Port

This describes how to install the PCL or PostScript 3 printer driver using the LPR port.
• Manage Printers permission is required to install the driver. Log on as an Administrators group
member.
• In an IPv6 environment, you cannot use the LPR Port. Use the SmartDeviceMonitor for Client port.
• You can install the printer driver from the CD-ROM provided with this machine or download it from
the manufacturer's Web site.
Installing the PCL printer driver
1. Quit all applications currently running.
2. Insert the CD-ROM into the CD-ROM drive.
The installer starts.
3. Select an interface language, and then click [OK].
4. Click [PCL Printer Drivers].
The software license agreement appears in the [License Agreement] dialog box.
5. After reading the agreement, click [I accept the agreement.], and then click [Next >].
6. Select a printer driver you want to use in the [Select Program] dialog box.
You can select several printer drivers.
The PCL 6 printer driver is installed in the language specified by your operating system.
7. Click [Next >].
8. Select the machine model you want to use.
The machine name can be changed in the [Change settings for 'Printer Name'] box.
9. Double-click the machine name to display the printer settings.
The details shown in [Comment], [Driver], and [Port] vary depending on the operating system,
machine model, and port.
10. Click [Port], and then click [Add].
11. Click [LPR Port], and then click [OK].
If [LPR Port] does not appear, see Windows Help and install it.
28