Windows Vista, Windows Server 2008 - Usb - Ricoh SP 5200S Operating Instructions Manual

D:\x86 or X64\DRIVERS\PCL6\XP_VISTA or X64\MUI\DISK1
• PostScript 3
D:\x86 or X64\DRIVERS\PS\XP_VISTA or X64\MUI\DISK1
The PCL 6 printer driver is installed in the language specified by your operating system.
9. Click [Next >].
10. Select the name of the machine whose driver you want to install, and then click [Next >].
If the [Hardware Installation] message appears, click [Continue Anyway].
11. Click [Finish].
If the installation is successful, the icon of the machine connected to the "USB001" port is added to
the [Printers and Faxes] window.
• To disable Auto Run, press the left Shift key when inserting the CD-ROM into the drive and keep it
pressed until the computer finishes reading from the CD-ROM.
• The number after "USB" varies depending on the number of printers connected.

Windows Vista, Windows Server 2008 - USB

• Manage Printers permission is required to install the drivers. Log on as an Administrators group
member.
• You can install the printer driver from the CD-ROM provided with this machine or download it from
the manufacturer's Web site.
If the printer driver has already been installed, and plug and play is enabled, the icon of the machine
connected to the "USB" port is added to the [Printers] window.
If the printer driver is not installed, follow the plug-and-play instructions of the machine to install it from
the CD-ROM provided with this machine.
1. Check that the power of the machine is off.
2. Connect the machine and computer using a USB cable.
Connect the USB cable firmly.
3. Turn on the power of the machine.
Found New Hardware Wizard starts, and USB Printing Support is installed automatically.
4. In the Found New Hardware Wizard window, click [Locate and install driver software
(recommended)].
Click [Yes] or [Continue] if the [User Account Control] window appears.
Installing the Printer Driver Using USB
47