Ricoh SP 5200S Operating Instructions Manual page 178

7. Mac OS X Configuration
7. Press [Print Jobs].
8. Press [Hold Print Job List].
A list of Hold Print files stored in the machine appears.
Depending on the security settings, certain print jobs may not be displayed.
9. Select the file you want to print, and then press [Print].
The confirmation screen appears.
10. Press [Yes].
The Hold Print file is printed.
• To stop printing after printing has started, press [Exit] until the printer screen appears, and then
press [Job Reset]. The file will be deleted.
• When printing is completed, the stored file is deleted.
• page 122 "Deleting Hold Print files"
Printing a Stored Print/Store and Print file
The following procedure describes how to print a Stored Print file.
1. In the application, on the [File] menu, click [Print].
The [Print] dialog box appears.
2. In the pop-up menu, click [Job Log].
3. On the [Job Type:] pop-up menu, click [Stored Print] or [Store and Print].
• Stored Print
Stores the file in the printer and print it later using the control panel.
• Store and Print
Prints the file at once and also stores the file in the machine.
4. In the [User ID:] box, enter the user ID using up to eight alphanumeric (a-z, A-Z, 0-9)
characters. A file name and password can also be entered arbitrarily.
The user ID associates the user with his / her jobs.
You can assign a password to a saved document, but password assignment is not mandatory.
The same password must be entered when printing or deleting.
5. After making the necessary settings, click [Print].
The document file is saved in the machine.
To print the document, perform the following steps.
176